Tel: 886. 909 602 109 Email: sales@salukitec.com
11
Fig. 8 Elements in rear panel
1. USB socket: USB3.0, Type-C interface.
2. Power off button: Long press of the button for powers off, which is used to reduce power consumption after closing the
software. During the working mode, the button is in blue light.
3. DC power input: 12V DC input, the maximum working current of the device is 6.5A. This is a LEMO FGG.1B.302 t fast-lock
connector.
The CSA2026 enters the standby mode after power up. When the software begins to initialize, it will make CSA2026
into a full power state and turn on the internal temperature-control fans. When software exits, the CSA2026 still
maintains part of the power consumption and keep the fans working, thus it can quickly enter the working mode when
software restart. Long press the power off button(3) to make the hardware enter the standby mode. Normally it is not
necessary to use this button to turn off the device.
