Tel: 886.909 602 109 Email: sales@salukitec.com
172
Save User State in User Reset mode.
Programmable command:
Not supported
Example:
None
4.2.10.4 Remote Control Port Config
1) GPIB Port Config
Functional Description:
For GPIB Port Config, please refer to "5.2.2 GPIB".
2) LAN Port Config
Functional Description:
For LAN Port Config, please refer to "5.2.1 LAN".
4.2.10.5 Instrument Self Test
1) Self Test [Run Test]
Functional Description:
Start self test on the user-selected self-test item.
2) Loop Test [ON/OFF]
Functional Description:
Loop Test is carried out on user-selected self-test items in ON/OFF state. Self test made in ON
state is cyclic until it is interrupted by the user. The default setting is (OFF).
3) Display test results [All/Error]
Functional Description:
Allways or ERROR is displayed during self test. The default setting is (OFF).
4.2.10.6 Debug Password
Functional Description:
Set or change the password to enter debug window. The default debug password will be set
before the instrument leaves the factory. If you have special requirements, please contact the
manufacturer.
4.2.11 File
4.2.11.1 Select Folder
Functional Description:
Select the folder tree on the left side of the window to select folder.
4.2.11.2 Select File
Functional Description:
Select the file on the right side of the window to select file.
4.2.11.3 Copy
Functional Description:
Copy the selected file on the right side of the window.
