Tel: 886.909 602 109 Email: sales@salukitec.com
21
2 Start Guide
This chapter contains precautions before use, overview of front and rear panels, common basic
configuration methods and data file management of S1465 series signal generator, so that the user
can have a preliminary knowledge about the instrument and configuration process. The content
contained in this chapter is consistent with that in relevant chapters of Quick Start Guide.
2.1 Preparation before use
2.1.1 Preparations before operation
This chapter introduces the precautions before initial setting and use of the S1465 series signal
generator.
WARN
Damage prevention
To avoid the electric shock, fire and personal injury:
Do not open the chassis without authorization;
Do not attempt to dismantle or modify any part not described in this manual. Improper removal
may cause the deterioration of electromagnetic shielding effectiveness, damage of internal parts,
etc. and affect the reliability of product. If the product is under warranty, we will no longer provide
the unpaid repairs.
Carefully read the relevant content in “1.2 Safety guide” and the following precautions for
operational safety, and pay attention to the specific operating environment requirements involved
on the data page.
CAUTION
ESD protection
Pay attention to the ESD protection measures in the workplace to avoid the damage to instrument.
For details, please refer to the relevant content in “1.2 Safety guide”/
NOTE
Effect of electromagnetic interference (EMI):
The electromagnetic interference can affect the configuration results, therefore, it is necessary to:
Select appropriate shielded cables, For example, use RF shielded twisted pair/network
connection cable.
Close the opened and temporarily unused cable connection port or connect the matched load to
the connection port in time;
Take note of the electromagnetic compatibility (EMC) grade in the reference data pages.