4
Tel: 886.909 602 109 Email: sales@salukitec.com
Detection adapter
Fig.3 Adapters
3. Operation Instructions
3.1 Handle operation instruction
(1) Adjust the focus wheel
Rotate the focus wheel left and right to achieve the best clear image.
(2) Detect the adapter
Before installation, please select the suitable adapter that matches the test end surface. When installing,
please pay attention to the coaxiality of the adapter head and the handle. Screw the adapter head to the
thread of the handle head, as shown in Fig.4.
Fig.4 Correct operation
When testing, please ensure a tight and stable connection between the connector under test and the adapter.
(3) Connect the handle to the OTDR or computer
Through the USB interface, connect the microscope handle to one OTDR or computer, as shown in the Fig.5
and Fig.6.
