2-5
If closing the door doesn’t activate the Sensor and show a closed door on the SALUS Smart Home
application, turn the Sensor counter-clockwise in ¼ turn increments until it activates when the
door is closed.
Module 2 – Wireless Accessories
SS881ZB Embedded Door Sensor
Section 2
Step 4.
Insert the Sensor into the Sensor
Sleeve using the Installation tool until the face
of the sensor is flush with the Sensor Sleeve .
Step 5.
Close the door and make sure the
Sensor operates properly, with the SALUS
Smart Home application showing the correct
door position .
Step 6.
Once the Sensor is at the correct depth, align the Sensor slots with the grooves in the Sensor
Sleeve to prevent undesireable rotation .
