EP110 can operate in 5 different modes, described in the table below. EP110 can be set to control either the
boiler OR the hot water. You can choose on which one of the channels you connect the controller. To access
operating modes, please press
Mode
key.
Operation Mode
Function
ON
Continuously on
ONCE
On for 1 period a day, from Program 1 ON to Program 3 OFF
AUTO
Automatic program control
ADV
When device is in Auto or Once mode, press the MODE
button for 3 sec for selecting Advance (ADV). This will move
the unit into the next program. When the ADV function
ends the device will return to normal program.
OFF
Continuously off
Operating Modes
MODE
+Hr
SELECT
SET
<
<
For activating the functions described above, press the
MODE
button. The operating mode is cycled in
the below sequence:
The circle icon will be rotating in a sequence when the relay
output is ON.
ON Mode
MODE
+Hr
SELECT
SET
<
<
Pressing the Mode key once activates the ON Mode. In ON mode, the
controller gives the boiler the ON command, so the heating or the hot
water will run continuously.
ONCE Mode
Pressing the Mode key twice activate the ONCE Mode. In ONCE mode, the
controller gives the boiler the command to run only for one period per
day (from program 1 ON to program 3 OFF)
10 EP110 Installation Manual
