14 Fan Coil FC600 Instruction Manual
M
M
Schedule Auto Mode. The temperature will be set depending on your created schedules
and the thermostat will change between the Heating/Cooling modes automatically.
M
If your thermostat is set to
Auto Heat/Cool selection
, these are the 3 possible combinations you can have by
short pressing the Mode Button:
1.
2.
3.
The A Icon indicated that the thermostat is running in auto heat/cool changeover mode.
The hand icon shows Permanent Override Mode (manual). You can set a temperature
depending on the auto heat/cool changeover setpoint temperature.
Eco Mode with auto heat/cool changeover. The temperature will be set using Eco
temperature setpoint. You cannot change the setpoint in Eco Mode.
By long pressing the Mode Button on your Fan Coil, you can
• Set Time and Date
• Create Schedules
• Access Offset Function
M
Note
: Setting the date and creating schedules is available only when the thermostat is
programmable (time and offset are available always). As default, the thermostat is configured as
digital (non-programmable) thermostat! If you would like to change the thermostat from digital
to programmable, you need to change d00 parameter from 0 to 1 (please see page 51).
2.8 Other Mode Button Functions
3sec
M
M
M
M
00:00
M