12
3sek.
Alarm
on
reaching
the
collector
maximal
temperature 180°C. Alarm
stops the collector pump
operation. Alarm will be off
when
the
collector
temperature drops below
178°C
and
the
pump
operation will be allowed.
Collector pump operation will be stopped.
During alarm the collector temperature indicator
shows current temperature in collector. Segments
10, 20 ,30°C are not lit.
9.
SWITCHING OFF
To switch the controller off, keep the
knob depressed for about 3 seconds in
displaying mode. If the controller is in
other mode, first leave the mode.
To leave edition mode, confirm
set value or keep the knob depressed
for 3 seconds or leave the controller for 10
seconds and it will close the selection mode.
To leave the selection mode, keep the
knob depressed for 3 seconds or leave the
controller for 10 seconds.
After switching the controller off, the
pump operation will be stopped.
9.1.
Test of unit
When switched on, the unit undergoes some
testing. At the time the display shows alternately
the testing screen and the software version.
Testing screen should illuminate all segments
of display; they should be lit with the same light.
If any segments are not lit during the testing
screen display, it indicates the controller damage.
Contact your local service.
Software version will be useful at possible
contacts with the service.
Software version is identified from lines that
display
the
collector
and
the
reservoir
temperatures. Example of testing screen is
presented in Fig. 9.1
Fig. 9.1 Identifying software version
The example screen presents software version
1.20
The table below includes numbers of software
versions
and
corresponding
temperature
indications.
Collector
temp.
Number 1
Reservoir
temp.
Number 2
100°C
9
80°C
90
90°C
8
75°C
80
80°C
7
70°C
70
70°C
6
65°C
60
60°C
5
60°C
50
50°C
4
55°C
40
40°C
3
50°C
30
30°C
2
45°C
20
20°C
1
40°C
10
10°C
0
35°C
0
1
.
20
Summary of Contents for PCSol 150
