8
3. SR868 smart relay receiver
3.1 Smart relay LED indication
The SALUS SR868 relay gives you control of the electrical heating. SR868 must be used in conjunction with the wireless RT series thermostats. The
thermostat communicates wirelessly with the SR868 smart plug receiver. The receiver should be supplied with 230VAC, the maximum load of the receiver
is 16A. Avoid installing the device in places directly exposed to water, moisture and air condensation.
Smart relay receiver has designed LED diode in the left upper corner. Here is description what an every single colour and diode means:
LED State
Description
Red
On
The relay is off.
Flash
The relay is in pairing mode.
Green
On
The relay is on.
2 x Flash
The relay is writing pairing code.
Red
and
Green
Flash alternately
The relay is paired but lost link.
Flash in different sequence
It indicates the software version after reboot.
