Press the UP or DOWN key to adjust the hour setting to the desired value,
and confirm your selection by pressing the SELECT key.
Pressing the SELECT key allows you to step through each of the items to
be reviewed or adjusted within the programmes in the following
sequence:
Programme Function Sequence
1
6am
00
21ºC
2
8am
00
14ºC
3
4pm
00
21ºC
4
6pm
00
21ºC
5
10pm
00
14ºC
…before then allowing you to cycle back to Programme 1. Pressing the
SET key at any time will confirm the setting and return to the programme
set selection. Each programme for all the other days of the week is set in
exactly the same way – just repeat the steps shown above, after entering
programming mode and selecting the day you want to programme.
Regardless of which programming mode the RT505TX is set for (5/2 or 7
day), not pressing any keys for 15 seconds will automatically save any
programming changes and exit to
Normal
mode. You can also review or
change programme settings when Frost Protection is enabled.
FROST PROTECTION
To enable the Frost Protection mode, press and hold the BACKLIGHT /
FROST button for three seconds with the RT505TX in Normal mode. Once
Frost Protection is enabled, the set point temperature is automatically set
to 5°C to provide protection from the risk of freezing.
Whenever Frost Protection is activated, the Frost Protection indicator will
flash in the sequence shown below:
While Frost Protection is activated, it will override any programme
settings until the mode is changed. To turn off Frost Protection mode,
press and hold the BACKLIGHT / FROST button for three seconds.
RT505TX INSTRUCTION MANUAL
10
Salus RT505TX Manual Blue_89 12/03/2014 10:42 Page 10
