background image

INTRODUCTION

A programmable thermostat is a
transmitter that combines the functions
of both a room thermostat and heating
controller into a single unit. The
programmable thermostat is used to
switch the heating system in your home
on and off as needed. It works by
controlling the temperature according
to a series of programmed settings that
take effect at different times of the day.

The RT505TX from Salus Controls is a stylish and accurate 5/2 or 7 day
programmable electronic thermostat with a large, easy to read Liquid
Crystal Display (LCD). This programmable thermostat can replace most
common residential thermostats and is designed to be used with electric,
gas or oil heating control systems. Unlike ordinary single unit design
thermostats, this is a new type of thermostat separating the operational
functions into two units. 

The Receiver is used for wiring connections and heat on/off control. The
thermostat provides the user interface and temperature sensing / control.
The two units are linked together by a Radio Frequency (RF) signal.

Features

5/2 or 7 day programming flexibility

Built-in start up programming for quick installation

Frost protection

Large, easy to read LCD with blue backlight

Boiler on symbol

Easy to use programming

User friendly

INSTALLATION

Please read the important safety information at the start of this
manual before you begin to install the device.

The RT505TX can be used in any convenient location by using
the included stand, or can be easily installed in a fixed position
using the industry standard back plate supplied with the unit –
this is used purely for mounting purposes, as no wiring is
needed for the RT505TX. The back plate can be mounted directly
to the wall surface.

RT505TX INSTRUCTION MANUAL

4

Salus RT505TX Manual Blue_89  12/03/2014  10:42  Page 4

Summary of Contents for rt505tx





















Reviews: