8-2
Table 8.1: Thermostat Settings (continued)
Section 8
SC102ZB/ST103ZB Installation and Operation Manual
Thermostat Configuration
Time:
To set the time, use the
or
keys to change the flashing hour
value, then press SELECT to choose the value displayed and select minutes .
With the minute value flashing, use the
or
keys to change the value .
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
Date:
To set the date, use the
or
keys to change the flashing month
value, then press SELECT to choose the value displayed and select date .
With the date value flashing, use the
or
keys to change the value .
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
Year:
To set the year, use the
or
keys to change the flashing year value .
Press SELECT to choose the value displayed and move to the next setting .
Note: This setting is available in standalone or local mode only.
Note: Schedule parameters are only available in standalone or local mode . If the Fan Coil Thermostat
is connected to the SALUS Smart Home application, the schedule must be programmed on your PC or
smart device .
Schedule:
While Prog is displayed, press the
or
keys to change the day group to be edited .
See the following table that describes which days are programmed based on the display .
After selecting the day group, press SELECT to move to setting temperatures for each interval during
the day .
Program Mode
Day Group Displayed
Schedule Description
Weekly
Every day of the week
5+2
Weekdays/Weekend
(Default)
Monday through Friday
Saturday and Sunday
Daily
Monday
Tuesday
Wednesday
Thursday
Friday
Saturday
Sunday