8-3
Section 8
SC102ZB/ST103ZB Installation and Operation Manual
Thermostat Configuration
Time Interval:
Use the
or
keys to set the start time
for each time interval, displayed next to the calendar icon .
1st: Set the hour for the time interval start
2nd: Set the minutes for time interval start
Press SELECT to move on to the heating setpoint .
Set Point:
Use the
or
keys to adjust the desired
heating temperature set point for the time interval
displayed .
Press SELECT to accept the set point and move on to
the cooling temperature set point .
Use the
or
keys to adjust the desired cooling
temperature set point for the time interval displayed .
Press SELECT to accept the set point and move on to
the next interval .
Set points for remaining time intervals:
Set the start time and heating and/or cooling temperature for the
remaining interval for a total of 6 intervals .
Skipping a Time Interval:
To skip a time interval,
press the
key in the hour setting mode until each
of the time and temperature digits change to a “
-
“ .
When time intervals are completed, the schedule
will return to the first time interval at the scheduled
time .
Schedule (Continued)
Temperature Offset:
Change the temperature offset value to adjust the display
of the sensed temperature . This will affect the sensor selected by the INT/EXT
sensor setting .
Use the
and
keys to set the offset in 1°F (0 .5°C) increments . The available
range is -6 to 6°F (-3 to 3°C) .
Press SELECT to accept the set point and return to the first item in the
Settings Menu .
Table 8.1: Thermostat Settings (continued)