9-1
Section 9
SC102ZB/ST103ZB Installation and Operation Manual
Operation
Operating Modes
Fan Coil Thermostats, Controllers and Remotes can be operated in the following operating modes:
• Standalone Mode – when SC102ZB Controller & ST103ZB Remote are paired but not connected to network
• Local Mode – when disconnected from the gateway
• Simple Mode – when connected to the gateway
• Remote: Not Connected – when remote is not on a network and/or not paired with a controller
Table 9.1: Operating Modes
Operation
Remote:
Not
Connected
Standalone Mode
Local Mode
Simple Mode
Network
State
None
SC102ZB acts
as a Zigbee
coordinator
Thermostat is
part of a network,
disconnected from
SG888ZB
Thermostat is
connected to
SG888ZB Universal
Gateway
RF Icon
Display
None
(Flashing)
SALUS
Smart Home
Icon
None
None
None
SetPoint
Change
Not
Available
Device Only
Device Only
Device or SALUS
Smart Home
application
Schedule
Not
Available
In Device, if enabled
In Device,
if enabled
In SALUS Smart
Home application
Change Fan
Speed
Not
Available
Device Only
Device Only
Device or SALUS
Smart Home
application
Mode
Change
Not
Available
Device Only
Device Only
Device or SALUS
Smart Home
application
Installation
Setup
Not
Available
Device Only
Device Only
Device or SALUS
Smart Home
application
Rule based
operation
Not
Available
No
No
Through SALUS
Smart Home
application