ST625TX INSTRUCTION MANUAL
26
Confirm the setting using the OK key, or Press the
Arrow key to return to the previous screen display.
The next menu screen allows you to set a temperature
setting. This temperature is the maximum temperature
that the heating system will operate at once the
previously set service date is reached.
The temperature is set by scrolling the Touch Ring to the desired setting, then
confirming with the OK key. After enabling SERVICE mode, there is a screen that will
allow you to enter an 11 digit number – this feature is intended for you to enter your
telephone number so that the end user can contact you when the next service is due.
The number is entered in the same way as the code – scroll with the Touch Ring until
you reach the required number, then confirm by pressing the OK key.
If you forget the code you will have to contact SALUS technical team. Once the code has been
entered, the next menu screen allows you to set the next service date for the system. Set the date in
the order day, month and year:
Now you have entered your own PIN code you will be
asked to select SERVICE ON or OFF.
Default is OFF, if you do not require the service function
activated press OK and proceed to HEAT or COOL menu.
If you require SERVICE mode activated, use the touch ring
to scroll from OFF to ON and press OK
HEAT or COOL
The unit is default HEAT. If you wish to configure the ST625TX for a
cooling application. Select COOL and press OK.
NOTE:
To allow saving of your selection in HEAT and COOL it will
still require you to continue through the menus.
