VERTICAL PUMP
RDV - RGV - RCV
RBV - RNV - REV
EN-38
8.
CHECKS AND MAINTENANCE
CAUTION!
The maintenance operations must be carried out by qualified and authorised personnel.
CAUTION!
Perform maintenance operations when the pump is off.
Risk
Description and procedural information
Danger of impact/tripping
Risk of impact and tripping on the edges of the machine structure.
It is mandatory to wear appropriate PPE.
Danger of impact,
dragging, crushing,
shearing.
Danger of impact, dragging, crushing, shearing during maintenance
stages.
It is forbidden to access the moving parts of the pump during its operation.
It is mandatory to wear appropriate PPE.
Danger of cutting/
shearing.
Danger of cutting and shearing on moving machine parts during cleaning
and maintenace stages.
It is mandatory to wear appropriate PPE.
High-pressure fluid
injection or ejection hazard
High-pressure fluid injection or ejection hazard during maintenance
stages.
It is mandatory to wear appropriate PPE.
Danger of burns and
scalds
Danger of burns and scalds during cleaning and maintenance stages.
Wait for the hot parts to cool down before proceeding.
It is mandatory to wear appropriate PPE.
High voltage/electrocution
hazard
Electrocution hazard during maintenance stages.
It is forbidden to carry out work on electrical components without first
swithcing-off the elecrical power supply.
It is mandatory to wear appropriate PPE.
8.1.
SAFETY INFORMATION FOR CHECKS AND MAINTENANCE
The following information is to be considered supplementary to the "SAFETY REQUIREMENTS" paragraph.
CAUTION!
Disconnect the power supply before any installation, maintenance and disassembly, making sure that
the lifesaving devices are operating correctly.
CAUTION!
It is necessary that the maintenance operations are carried out by using suitable equipment and in
rooms suitable for ensuring the maximum safety of the operators.
FORBIDDEN!
It is forbidden to remove the guards of the coupling or of the rotating shafts and any other safety
protection during operation of the machine. If the protections are removed for maintenance, inspection
operations or machine stop, they must be restored correctly and in their entirety before starting up
again.
IMPORTANT!
Use only original or authorised spare parts from Salvatore Robuschi & C. S.r.l.
The use of any other non-foreseen or unauthorised spare part absolves Salvatore Robuschi & C. S.r.l.
from any liability in case of damage and invalidates the pump warranty.
