REVISED 5/19/2017
© SAM CARBIS SOLUTIONS GROUP, LLC, 2017, WITH ALL RIGHTS RESERVED
PAGE 21
(7)
Before operation, visually inspect the area between the equipment and the vehicle for any
obstruction that would impede movement or create a tripping hazard. Remove any obstruction
before operating the equipment.
(8)
Carbis equipment must never be forced, by any means, to overcome any seen or unseen obstacle or
obstruction.
(9)
Visually inspect the equipment before each use. Never access damaged or broken components.
(10)
Keep hands clear of chains while gangway is in motion.
(11)
Material being loaded onto/into vehicles or unloaded from vehicles may present a health hazard. It
is the sole responsibility of the owner to ensure that operating personnel are familiar with any
hazards associated with the material, and to implement the appropriate safety measures to protect
personnel against such hazards.
Failure to comply with these warnings COULD result in serious injury or death.
iii)
(1)
Only qualified personnel in good physical condition, trained in the proper operation of this
equipment, should be permitted to operate it.
(2)
Appropriate Personnel Protective Equipment (PPE), such as gloves, safety glasses, safety shoes, etc.,
should be worn at all times during operation of this equipment.
(3)
Make certain that walk surfaces are free of product that would otherwise interfere with the safe,
slip-resistant feature of the walk surface. The walking-working surfaces of every work area are to be
kept in a clean and, so far as possible, dry condition.
Failure to comply with these cautions COULD result in personnel injury or damage to equipment.
iv)
(1)
The gangway should be in the stored position, with the gangway locked, before spotting any vehicle.
NOTICE
CAUTION
!
