EN
23
APPLIANCE OVERVIEW
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Motor unit/housing
2. Anti-slip feet
3. Power and control switch
4. Power indicator lamp
5. Carrying handle
6. Pulp bin (600 ml)
7. Juice pitcher (1000 ml)
8. Strainer
9. Filter bowl with juice spout and pulp
discharge chute
10. Sealing sleeve
11. Rubber stopper
12. Juice spout with closure
13. Pulp discharge chute
14. Stainless steel mesh filter baskets with
automatic cleaning module
A. Small mesh filter: for clear juice
B. Large mesh filter: for thick juice
15. Extraction screw
16. Feeder chamber
17. Rotator feeder tube
18. Rotator lock
19. Pusher
20. Feeder tube lid
21. Cleaning brush
This appliance features a power and
control switch.
ON
Turns on the appliance
OFF
Turns off the appliance
REV
Reverse rotation: keep depressed to
use
BEFORE FIRST USE
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Remove the appliance from the box. Remo
-
ve all packaging cardboard and film pieces
from the appliance parts.
2. Thoroughly clean and dry the appliance,
especially all appliance parts with direct
contact with food products (See section:
CLEANING AND MAINTENANCE).
3. The Slow Juicer has a safety lock: the
appliance will only turn on if the feeder
chamber
⑯
is properly assembled.
SLOW JUICER ASSEMBLY
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
11
10
1
Place the rubber stopper
⑪
in the square hole under the filter bowl
⑨
. Place the sealing sleeve
⑩
in the filter
bowl
⑨
, if not assembled already.
