Sam4S ER230 Series Electronic Cash Register AU
Program Mode Programming
•
91
System Option Programming
Refer to the “
System Option Table
” to review the system options. Read each option carefully to
determine if you wish to make any changes. Default value has been highlighted in
bold
print.
NOTE: Because after Memory All Clear all options settings are automatically set to default, you do
not need to program this section unless you wish to change the default status.
Program 30 - System Option Programming
Programming a System Option:
1.
Switch to
P
Mode by press
MODE
function key.
2.
Enter
3 0
, press the
SBTL
key.
3.
Enter a system option address, and then press the
X/TIME
key.
4.
Enter the number representing the status you have selected, or if there is more than one
decision to be made in an address, add the values representing your choices for each
decision and enter the sum. Press the
SBTL
key.
5.
Repeat from step 3 for each system option you wish to change.
6.
Press the
CASH
key to end system option programming.
System Option Flowchart
SB TL
X/T IME
Status
CASH
Repeat for each
System Option
Option #
SBT L
0
3
Ú
Default values have been highlighted in
bold
