82
•
Program Mode Programming
Sam4S ER230 Series Electronic Cash Register AU
Program 150 - PLU Group Assignment Programming
Each PLU may report to any three levels of 20 groups. Group totals appear on reports, so that you can
track sales of different types of items. A group can also be used to designate items that are to print on
an optional kitchen printer.
NOTE: The PLU will report to group "0", if not programmed to report to groups 1-20.
1.
Switch to
P
Mode by press
MODE
function key.
2.
To begin the program, enter
1
5
0
, press the
SBTL
key.
0
SBTL
5
1
3.
Select the PLU or PLUs you wish to program in one of the following ways:
•
Press a PLU on the keyboard, or
PLU
•
Press the first PLU in a range of PLUs that are to receive the same setting then press the
last PLU, or
PLU
PLU
•
Enter up to 15 digit number of the PLU and press the
PLU
key, or
PLU
Enter the PLU#,
up to 15 digits
•
Enter the number of the first PLU in a range of PLUs that are to receive the same
setting; press the
PLU
key. Enter the last PLU number in the range; press the
PLU
key,
or
PLU
Enter the PLU#,
up to 15 digits
Enter the PLU#,
up to 15 digits
PLU
•
For
a barcode item, scan the barcode
,
4.
Enter up to three 2-digit numbers representing the groups where you wish to add the PLUs
sales, i.e. enter
1
0
for group 10 or enter
0
4
for group four. If a PLU is link to group 03 as
1
st
group only, please enter
0 3
0 0
0 0
. Then press the
X/TIME
key.
2
n d
Group
1
st
Group
3
rd
Group
X/TIME
5.
To program additional PLUs, repeat from step 3, or press the
CASH
key to finalize the
program.
CASH
