background image

ER-390 Series 

Operating Instructions   

  21 

Clerk Sign-On/Sign-Off

 

See "System Option Programming” to review your clerk options:   

• 

System option #2 allows you to select direct or code entry sign on and/or stay-
down or pop-up operation.   

Depending on how your machine has been programmed, sign-on will take place only at the 
beginning of a shift (stay-down), or may have to be repeated for each transaction (pop-up).  
If your machine has been programmed for stay-down clerks, the clerk currently signed on 
must be signed off before another clerk may be signed on. 

Check with your store manager to see which options have been selected for your register.   

Before any transaction may take place, a clerk must be signed on.  Clerk sign-on is 
accomplished in one of two ways: 

Direct Sign-On 

 

To sign on a clerk, enter the clerk number and press the clerk key.   

 

 

CLERK 

Clerk # (1-10) 

 

 

CLERK 1 ~ CLERK 10 

 

To sign the clerk off, enter 0 (Zero) and press the clerk key. 

0

CLERK

 

 

CLERK 1 ~ CLERK 10 

 

Coded Sign-On

 

To sign on a clerk, press the clerk key, enter the clerk code, and then press the clerk key 
again.   

 

 

CLERK 

CLERK 

 

 

 

 

 

Clerk Code (up to 6 digits) 

 

 

To  sign the clerk off, enter 0 (Zero) and press the clerk key. 

Summary of Contents for ER-390 SERIES















































































































































































































Reviews: