3. Installation and Operation
SAM4S ER-5100II SERIES
3-5
3-3 Operation
Note:
Before using this Electronic Cash Register (ECR) for the first time, leave it powered ON in the REG mode for at
least twenty-four hours. This allows the Ni-MH battery, which maintains the ECRs memory while the power is OFF,
to fully charge.
3-3-1 Mode Switch
The position of the Mode Key determines the action of the ECR. The modes are as shown in Table 3-3
Figure3-4 Mode Switch Table3-3 Mode Switch Function
The mode switch can be used to access the following key lock positions.
Mode Accessible
Position Remark
VOID
Void, Off, Register(REG), Manager(X)
REG Off,
Register(REG)
X
Off, Register(REG), Manager(X)
Z
Off, Register(REG), Manager(X), Clear Totals(Z)
PGM
Void, Off, Register(REG), Manager(X), Clear Totals(Z), Program(P)
S
Void, Off, Register(REG), Manager(X), Clear Totals(Z), Program(P), Service Mode(S)
Table3-4 Key Function
Note :
The Key can be removed from the key lock in the OFF or REGISTER position.
Mode Key
Function
VOID
VD
Use to void (correct) items outside of a sale.
OFF
-
The Register is inoperable.
REG
REG
Use for normal registrations.
X
X
Use to read register reports and perform other manager functions.
Z
Z
Use to read register reports and reset totals to zero.
PGM
P
Use to program the register
S
C
Use for H/W tests and special setting.
Summary of Contents for ER-5100 II SERIES
