108
Service Mode Programming
SAM4s ER-655II v1.2
4.
With the key code list displayed, you can press
PAGE DOWN
repeatedly, or
PAGE UP
until you find the key code you wish to use. Type the key code
number you wish to place and pess
ENTER
. The KEY ASSIGNMENT screen
displays again:
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
PRESS ENTER TO EXIT
0
5.
Continue to program function key locations as necessary. When you have
completed function key programming, press the
ENTER
key to finalize. The
screen displays:
KEY ASSIGNMENT
PRESS ENTER TO
SAVE CHANGES
OR
PRESS ESCAPE TO EXIT
WITHOUT SAVING
6.
Press
ENTER
to save the changes you have made, or press
ESC
to exit without
saving changes.
7.
The printer will print out a receipt showing all the changes made to the keyboard.
Notes:
1.
Numeric keys (0-9), CLEAR/ESC, and CASH/ENTER cannot be removed from the
keyboard unless they have been assigned to a new keyboard location. This protects the
programmer from accidentally removing keys that are required for register programming
and operations.
2.
If you wish to program the CASH/ENTER key, select it immediately after selecting KEY
ASSIGNMENT from the SERVICE MODE menu. After the initial key is programmed,
the CASH/ENTER key is used to finalize the program.
Summary of Contents for ER-655II
Page 10: ...vi Contents SAM4s ER 655II v1 2...
Page 100: ...90 X Mode SAM4s ER 655II v1 2...
