144 • Service Mode Programming
Sam4s SPS-300 OP Manual v1.35
When complete, the message
Completed
displays at the PC. Click
OK
and the
Download program will close. At the ECR, when the load is complete, a rapid beep-
beep-beep will be heard, and the display will flash rapidly. Turn the power switch to
OFF
, the program update is complete.
Disconnect the PC cable.
Perform a
MEMORY ALL CLEAR
on the ECR. The ECR is now ready to program
or to load a previously saved end-user program.
Entry Password
SAM4s SPS-300 ROM version 1.059 provides password control for access to the P-Mode Menu.
Refer to the “Password Access to P-Mode Appendix” on page 306 for programming and
operation details.
Elements of the feature include:
•
A System Option flag to enable password control of
P-Mode
. You must first set this
option to
Y
(yes) to force password entry at
P-Mode
.
•
A
Service Mode
option to set a four-digit numeric
Entry Password
.
•
Password entry at the
P-Mode
Screen.
Clear Current Batch
The clear batch command erases all the current batch transactions from the DataTran memory
even if they have not been settled.
A LOCAL TRANSACTION INQUIRY should be printed prior
to clearing the batch.
This will ensure that the operator has the transaction detail to re-enter if
required.
This operation should only be done under the direction of DATACAP.
