Sam4s SPS-300 OP Manual v1.35
Operations • 71
Food Stamp Sales
The
SPS-300
is capable of sorting food stamp and non-food stamp eligible items. If a customer
chooses to pay by food stamps, the eligible total can be subtotaled and food stamp payments
accepted.
NOTE:
Integrated EBT transactions was added at firmware version v1.034.
If you choose to use this feature, you must:
•
Locate the appropriate function keys on the keyboard,
F/S SHIFT
,
F/S SUB
, and
F/S
TEND
, and then set the appropriate options for the
F/S TEND
key.
•
Determine and set the food stamp status for each PLU item or category.
Refer to the "Service Mode Programming" and the "Program Mode Programming" chapters to
make the appropriate settings.
1.
Register the items you wish to sell. You
do not need to sort food stamp eligible or
non-eligible items. The
SPS-300
will
maintain a subtotal of eligible items
based upon the pre-programmed status
for each PLU.
If you wish to register a normally food
stamp eligible item into a PLU
programmed as non-food stamp eligible,
press the
F/S SHIFT
key before
registering the item. In the same manner,
you can register non-food stamp items
into food stamp eligible PLU’s.
2.
If a customer wishes to pay with food
stamps, press the
F/S SUB
key to display
the food stamp eligible total:
F/S SUB
3.
Enter the amount of food stamps
tendered by the customer. For example,
for $20.00 enter:
0
0
0
2
F/S
TEND
4.
The remaining amount due displays.
(Note, depending upon programming,
change less than $1 can be applied to the
balance.)
5.
Total or tender the remaining balance.
THANK-YOU
CALL AGAIN
DATE 06/05/2011 SUN TIME 08:33
PLU1 F $1.29
PLU2 $4.29
TOTAL $5.58
F/S TOTAL $1.29
F/S TEND $20.00
F/S CRT AMT $0.71
TOTAL $3.58
CASH $5.00
CHANGE $1.42
F/S/ CHANGE $18.00
CLERK 1 No.000011 00001
