SAM4S SPS-300 Series Electronic Cash Register AU
Program Mode Programming
•
151
Descriptor Code Method
If you customise your keyboard by covering key locations, or by installing double or quad size keys,
you will need to program descriptors using the descriptor code method.
See
Program Mode
Æ
System Option
Æ
pg17 (page 17)
. You must set the option
PROGRAM
DESCRIPTOR BY CODE
to
Y
to use the descriptor code method.
Program Sequence
1.
With the cursor pointed at a descriptor field, refer to the Descriptor Code Chart below and
type the code for the first character. Press the decimal “
·
” key.
2.
For each additional character, type the code and press the decimal key. Each character
will be displayed as it is entered.
3.
Press
ENTER (CASH)
when the descriptor is complete.
Program Example
To program the descriptor "APPLE", type:
Note:
For lower case enter
98
after the descriptor code. For example:
a =
For DOUBLE (wide) characters enter
99
after the descriptor code. For example:
A
=
The Descriptor Code Table is on the following page.
6
5
9
9
•
ENTER
6
5
9
8
•
ENTER
6
9
•
ENTER
E
7
6
•
6
5
•
8
0
•
8
0
•
A
P
P
L
