190
•
Program Mode Programming
SAM4S SPS-300 Series Electronic Cash Register AU
Function Key Programming
This
Function Key Programming
allows to program function key name, and status available. A
function key can not be programmed unless has been assigned on the real keyboard or on one of the
two
Func Lookup
(Function Key Look Up) keys.
1.
From the
PGM
control lock position menu, press
5
for
FUNCTION KEY
. The
FUNCTION
KEY PROGRAM
screen displays:
2.
Select the function key you want to program,
•
Press the function key on the keyboard,
or
•
When the function key you want to program locates on one of the
Func Lookup
keys,
press the
Func Lookup
key, press
1
to select
1.STATUS PROGRAM
, then press the
number on the numeric pad for the function key you want to program.
3.
To browse through the options, press
ENTER
key to move “
Å
” symbol
option by option
.
4.
When reaching the option you want to modify,
•
For
descriptor
programming options, the keyboard will change to
Program Overlay
,
enter the character you need up to
12
characters. Or enter Descriptor Code to make up the
description you want.
NOTE:
System Option
is default to
Program Overlay
. Please check setting on
page 17
•
For
numeric
programming options, enter the number through numeric pad,
•
For
Yes/No
programming options, press
YES/NO
key to toggle between
Y
and
N
1.CANCEL
2.MDSE RETURN
3.RA1
4.PO1
5.TIP
6.TAXEXMT
7.CONV1
8.TIME IN/OUT
FUNC #1 PROGRAM
0.MENU ASSIGNMENT
1.STATUS PROGRAM
FUNCTION KEY PROGRAM
PUSH FUNCTION KEY TO
BE PROGRAMMED
