108
P Mode Programming
SPS-500 Program Manual v1.31
(52) USE DEST. OPTION
If “The Same For All Reg”, all registers will have the same settings for option #2 (Enforce Destination)
and option #3 (Default Destination). If “Register Separately”, settings for options #2 and #3 will not
download and must be programmed separately. For example, if a restaurant has both counter and drive
thru service, you would select “Resister Separately” so that counter registers would prompt destination
and drive thru registers would not prompt destination entry.
(53) ONLY DISPLAY SCREEN WHICH HAS PLU ON SELECT PLU PROGRAM
When programming PLUs, the SELECT PLU screen allows you to view and select PLUs as they are
placed on keylinks. If the YES option is selected here, keylinks that do not display any PLUs are not
available to view.
(54) DISPLAY MESSAGE ON POLE
A programmable 25-character message can be displayed on the standard pole display. Choose NONE,
MESSAGE to display the programmable message, or TIME to display the time. Select
P
Mode,
MESSAGES, POLE DISPLAY MESSAGE to program the message.
Note:
Message will display when
screen saver is displayed.
(55) POLE DISPLAY MESSAGE DIRECTION
Choose the direction you wish the pole display message to scroll: LEFT, RIGHT or BOTH to view the
message bouncing back and forth.
(56) ALLOW SALES UNDER MINIMUM STOCK
When STOCK status is assigned to a PLU (see PLU STATUS GROUP option #16), a warning “BELOW
MINIMUM STOCK” will display when if the PLU is registered and stock is below the minimum level.
(57) SCREEN SAVER TYPE
Select FLOATING or ROTATE. Floating requires a single image, named “logo.jpg” which will float in a
pattern across the screen. Rotate allows multiple images to display in sequence. Up to 50 images are
available and must be named “logo##.jpg” where ## is the image number: 01 through 50.
(58) SHOW REAL TIME STOCK ON KBD
If Yes, the current stock counter will be displayed on the PLU button located on a Key Link. Stock
counters may be slightly different if the items are registered at other terminals in a network. The stock
counter is updated after the key is touched.
(59) SUPPRESS SELECTIVE DISCOUNT ERROR MESSAGE
If selective discount (coupon search) is used, an error will result if a discount is attempted for an item that
is not registered in the transaction. You can suppress that error message here. (To set up selective
discounts, see “Promotion Table” on page 153 and also see the “"%” Key Program Note” on page 101.)
(60) PRINT POWER FAIL COUNT WHEN POWER FAIL OCCURS
Each time the register powers on it will print a chit to the programmed receipt printer stating there was a
power fail with the time, date, register number. For example:
POWER FAIL!!
TIME: 16:53 DATE : 7/10/2009
POWER FAIL COUNT : 2
Also added a way to reset this count. In REG mode press [X/TIME]; the number of POWER FAILS
displays and the user can press [RESET] to set number of power fails to 0. The manager password will
be needed to reset the power fail count.
