03. Connecting Peripherals
System Installation
◀ 2 - 14 ▶
Receipt Printer
Error Status & Error Resolution
–
Cutter Not Home
Cutter Not Home
This happens if the cutter blade steps forward while the printer is on (LED is light on).
In this case, the buzzer repeatedly sounds like
“Beep Beep Beep ---, Beep Beep Beep ---”
and LED turns on Green / Red light alternately.
To solve this error, please refer to Error Resolution page 2-15.
about 250ms
about 250ms
250ms
250ms
250ms
about 2.5sec (2500ms)
about 500ms
about 500ms
ON
OFF
Cutter Not Home : LED and Buzzer Status
HOME Contents Help Print Exit
?
Introduction
System Installation
Make sure of
installation area
Before connecting
peripherals
Connecting Peripherals
Connecting Serial Port Devices
such as Barcode Scanner
Connecting RJ-11 Cash Drawer
Connecting RJ-45 LAN Cable
Connecting USB Device
Connecting PS Module
Connecting Security
/ Scanner Module
Connecting Receipt Printer
Receipt Printer
Dismantle the Cover
for Customer Displays
Connecting DVR Card
Connecting AC Power
Cord to the Set Plug
Cable Management
System On / Off
System Use
System Expansion
& Dismantle
Appendix A
System Set-Up
Appendix B
System Structure
▶
▶
▶
▼
SPT-7000