04. System On / Off
System Installation
◀ 2 - 21 ▶
System On
1. Power up the peripherals which are connected with the system.
2. Press the power button placed at the right bottom side of the system.
3. Power Light is to be lit at the right bottom side of the system.
4. Windows initial screen will appear after a while.
After installation of the system, proceed to power on the system with following steps.
HOME Contents Help Print Exit
?
Power Light
Power Button
Introduction
System Installation
Make sure of
installation area
Before connecting
peripherals
Connecting Peripherals
System On / Off
System On
System Off
System Use
System Expansion
& Dismantle
Appendix A
System Set-Up
Appendix B
System Structure
▶
▶
▶
▼
SPT-7000