09. Main Memory Removal
System Expansion & Dismantle
◀ 4 - 29 ▶
Main Memory Removal
You might need to extend the memory capacity.
You need to check the specification of the main & extended memory when you extend the main memory.
Memory supports max. 4GB according to the board specificaton.
BIOS will automatically detects memory type, size & speed, when the new one is equipped.
1. Turn off the system.
※ All cables must be disconnected before dismantling of the system.
2. Remove I/F & rear covers.
3. Push the top cover to remove.
Then, remove a screw & push the dummy cover to the upper side.
4. Pull the levers in both sides to remove the memory.
Introduction
System Installation
System Use
System Expansion
& Dismantle
System Dismantling
& Assembling
HDD Replacement
Internal Speaker
& USB Removal
Receipt Printer
& Board Removal
Scanner
& Dallas Removal
SMPS Removal
Mainboard ASSY Removal
Various Boards Removal
Main Memory Removal
Remove Display Assembly
Remove MSR
Remove Display Board
Remove Touch Panel & LCD
Appendix A
System Set-Up
Appendix B
System Structure
▶
▶
▶
▼
SPT-7000
HOME Contents Help Print Exit
?
