34
ALPS / OLIMP
SNOW PLOW
OPERATOR’S MANUAL
ATTENTION:
When the gap is adjusted to
Ø
= 0 mm the blade will not be inclined automatically
under the snow’s pressure and coming into an obstacle. Exceeding maximum
force F
max
= 1200 kG on single blade will cause plow’s damage
.
ATTENTION:
When working with adjustment
Ø
= 0 mm an operator must be familiar with
drawings in
showing permitable values and load placement as well as
Fig. 35.
Place of blade’s roller mechanism gap’s measurement a and its regulation
Factory set adjustment of the gap
Ø
= 10 mm, owing to hard-to-tear HARDOX steel enables light
ground operations. It is very crucial to know, that such an adjustment with high speed will increase the
risk of plow’s damage owing to overload caused by hitting the blade into immovable obstacle, of which
the warrantor is not responsible.
Ø
Ø
0 mm F
max
= 1200 kG
Ø
6 mm F = 800 kG
Ø
8 mm F = 700 kG
Ø
10 mm F = 550 kG
Ø
12 mm F = 400 kG
F
Roller
Mechanism’s
housing
Regulation
bolt
Nut
Ø
10
Ø
8
Ø
6
Ø
12
Regulation shafts
ATTENTION!
Adjustment
Ø
= 0 mm will
cause blocking of blade’s
inclination mechanism
.
