Operator's manual
Two-rotor in-line rake
DUO 680
DUO 740
- 9 -
X
Y
Fig. 5.
Moving machine by transport holders
Fig. 6.
Location of center of gravity on rakes
Tab. 3.
Location of center of gravity
Dimension [ft. in]
Model
DUO 680
DUO 740
X
14' 9"
17' 1"
Y
2' 5"
2' 2"
4.3. Working parts
Before operating the rake check the condition of both the rotor and tines.
Worn or damaged tines should be replaced immediately with new ones.
NOTE:
When replacing working parts wear protective gloves.
4.4. PTO shaft
Before operating, read bar manufacturer's manual placed on the shaft. Follow all safety
precautions in that manual.
Use only PTO shafts recommended by rake’s manufacturer with guards in good condition.
In order to operate safely, use only undamaged PTO shafts and shields. Damaged PTO shafts
and shields must be repaired or replaced with new ones before use.
4.5.
Hydraulic assembly
Hydraulic assembly is under high pressure. Hydraulic oil under pressure may penetrate skin
and cause serious injury or death. Skin and eyes should be protected when working around this
assembly.
In case of injury caused by a liquid under pressure, call a doctor immediately.
Hydraulic hoses can be connected to the tractor's hydraulics provided that both the tractor’s and
the rake's hydraulic assemblies are not under pressure. To remove the pressure from the hoses,
start the tractor's hydraulic valves several times with the tractor off.
