21
OPERATOR'S MANUAL
HYDRAULIC FRONT-LOADER EXTENSION
ARM
FISHER
5.5.1.
Operating control panel
WARNING!
Control panel should be connected to the machine in the following order:
1.
connect control panel, so machine's control system is completely electrically
connected,
2.
connect power plug.
Reverse connection order is not allowed, it may damage the control panel.
The panel is used to choose a cylinder (either shift or rotation) to be operated with the vehicle's
hydraulics. For panel installation description, see section 5.1 herein (
Fig. 14.
Control panel
5.6.
Operating hydraulics
Periodically check the condition of hydraulic hoses and fittings, and if damaged, replace them
with new ones. Irrespective of the above replace hydraulic hoses every 5 years including their storage
time. In the winter period it is recommended to store the machine in a dry, well ventilated room, paying
attention that hydraulic hoses are not deflected.
WARNING!
Oil used in hydraulic circuits is toxic. Before any servicing, oil replacement,
the operator should wear protective clothing.
Strictly follow the valid regulation on hazardous waste. Used oils should be
drained to special containers and taken to a specialized used oil treatment
plant.
5.7.
Maintenance and service
5.7.1.
Daily maintenance
When you finish each day of operation carry out the following maintenance:
❑
remove any grass, mud, etc. from the machine,
❑
inspect all visible parts and components and their connections; tighten all loose bolts and nuts and
replace all damaged and/or worn parts,
❑
lubricate all pins and cylinder joints,
LED indicator for
cylinder selection
–
shift
Switch
LED indicator for
cylinder selection
–
rotation