Instruction manual
Rear - front and rear flail mowers
MIDO, GRINO, VINO, MAMUT
-
19
-
Fig. 10.
The hitch of the
MIDO
,
VINO
flail mowers a) rigrid hitch, b) moving hitch
Fig. 11.
The moving hitch in the
GRINO
and
MAMUT
flail mowers
For
MIDO, VINO
or
GRINO
flail mowers mounted on the rear of the tractor, they operate at
540 rpm. When operating with mower mounted on the front 3-point linkage adjust the machine to
PTO speed of 1000 rpm.
Follow the procedure:
in
MIDO 140
flail mower, switch belt pulleys around – at the top SPB 170-3 belt pulley, at the
bottom SPB 236-3 belt pulley,
in
MIDO 160/180/200/220
flail mowers, switch belt pulleys around – at the top SPB 170-4 belt
pulley, at the bottom SPB 236-4 belt pulley,
in
VINO 160/180
flail mower, switch toothed wheels around – at the top TB-48-8M-50 toothed
wheel, at the bottom TB-64-8M-50 toothed wheel,
in
GRINO
flail mower, switch belt pulleys around – at the top SPB 180-4 belt pulley, at the
bottom SPB 212-4 belt pulley – exchange wedge belts to XPB 1450 (see parts catalogue),
In case of improper PTO shaft’s rotational direction turn the gear by 180°, change place of
tightening of drain vent and vent so that it is in the upper section of the gear.
5.2. Connecting the PTO shaft
During PTO assembly, pay attention to the pictogram placed on the shaft. It is indicating the
correct assembly direction.
Prior to commencing operation, examine and adjust length of PTO shaft, which is designed to
mount machine on tractor. The cover should be secured so that it does not spin by securing the
4
5
6
4
6
a)
b)
4
5
