Instruction manual
Rear - front and rear flail mowers
MIDO, GRINO, VINO, MAMUT
-
27
-
1
2
Tab. 9.
Values of bolt tightness
7.
LUBRICATION
7.1. Angle gear
Everyday before starting work the oil level should be checked and if necessary refilled by
removing plug (
1
) in the upper part of the gear (
Fig. 20
). The oil level is checked by removing the
control plug (
2
) on the side of the gear. If the oil level is too low replace it until it appears in the
control opening (
2
). The amount of oil in the gear is about 1 liter (
Tab. 10
). Oil levels should be
checked with the mower on level ground.
Tab. 10.
Oil capacities
Fig. 20.
Control point and oil change point of the angle gear
7.2. Flail and copying shaft
Greasing with LT – 43 grease of flail shaft bearing (both sides) should be performer on
the show points
Fig. 21
.
Fig. 21.
Lubrication points of the bearings of flail shaft
Mower
type
Amount
of oil [l]
Oil type
Changing
frequency
090
1,1
SAE 80W-90
API GL-4
once every 3
seasons
(with heavy use)
100
2,0
Lubrication
points
