Instruction manual
Rear - front and rear flail mowers
MIDO, GRINO, VINO, MAMUT
-
32
-
10.
MOWER REPAIR AND DISPOSAL
WARNING!
Before performing any repairs the mower must be disconnected from
the tractor.
10.1. Repair
Before repairing or assessing whether the mower is still serviceable, the machine should be
carefully cleaned of dirt, mud and plant remains.
After checking nuts and bolts, proper slack in joints, gears we can assess if the machine is still
serviceable. Worn out bolts, pegs and pins should be replaced.
Once the machine is repaired perform the following:
make sure that all elements are installed properly,
Install the removed guards,
check whether screws and nuts are tightened,
Once all the guards are installed, perform a warm-up start to make sure the repaired machine
operates properly.
10.2. Disassembly and withdrawal from use
WARNING!
When disassembling the machine pay particular attention to additional
dangers as crushing, cutting, wounding, concussion. Use proper tools and
personal protective equipment: protective gloves, clothing and shoes,
goggles, etc. Pay attention so that the machine works efficiently, and
therefore it is required to secure the machine with supports.
When the mower is no longer serviceable it should be properly disposed of. All remaining oil
should be drained from the angle gear and delivered to a recycling facility and recycled. Carefully
clean remaining parts with solvent and remove any recyclable parts. They should be delivered to a
proper recycling facility and recycled or reused. Remaining metal parts should be scrapped.
