Operator’s manual
Double-sided mower with central
suspension
“REWERS”
- 36 -
6.4.
Adjusting the cutterbar
Swath width is adjusted with swath guides mounted on the 3-point linkage frame of
the cutterbar (
Fig. 33
).
In order to adjust the guide, the following should be performed (for: KDDR 861 (H), KDDR
941 (H)):
loosen locknuts (
2
) and screws (
3
),
shift the guide arm (
6
),
tighten screws (
3
) and locknuts (
2
),
loosen locknuts (
4
) and screws (
5
),
then adjust shield height and angle (
7
),
tighten screws (
5
) and locknuts (
4
).
Fig. 33.
Adjustment of swath guides: 1 - swath guide, 2 - locknuts, 3- arm adjustment screws, 4 - locknuts, 5-
shield adjustment screws, 6- guide arm, 7- shield
In order to set swath width, adjustment of swath guides (
1
) should be performed (
1
) (
Fig. 34
)
(for: KDDR 861 S (H), KDDR 861 SL (H), KDDR 941 S (H), KDDR 941 SL (H)):
loosen eye screw (
2
) of the swath guide,
set the swath guide (
1
) as needed,
tighten screw (
2
),
even spreading of swath might be adjusted with wheels (
3
) the same as it is performed with
guides.
1
2
3
6
4
5
7
