Operator’s manual
Double-sided mower with central
suspension
“REWERS”
- 4 -
3.
PROPER USE
KDDR mowers are suitable for use in a set with KDF front mowers of more than 3 m in
width.
The mower is equipped with
“Perfect Cut”
cutterbar.
Table 1
shows differences in mowing
height depending on angle at which cutterbars operate.
Tab. 1.
Mowing height depending on the kind of the cutting bar and its tilt angle
„Perfect Cut” cutting bar
No tilt
3° tilt
5° tilt
Standard mowing height
Optional heights when using high mowing topping
Optional heights when using high mowing double topping
The KDDR mower is intended to mow green fodder such as grass and alfalfa on permanent
grassland (pastures), on crop fields without rocks, and to form loose rows of cut forage.
The pasture or field being mown should be even and best if prepared by rolling. In the event
there is a majority of tall grass, the first and second mowing should be done at a height of 6–7 cm,
while with a majority of short grass, at a height of 5 cm. Therefore, the final row should be cut
a little bit higher so 7–8 cm from the ground.
CAUTION:
Use of the mower for other purposes than the above mentioned is forbidden.
Different use than the above mentioned will be considered as improper and
may lead to revoking of the warranty. Mower should be used, operated and
repaired only by people familiarized with its detailed specifications and with
safety rules and regulations. Wilful changes of the mower will lead to
revoking of the warranty.
