30
KDT
REAR DISC MOWER
OPERATOR’S MANUAL
Fig. 19
. KDT mower prepared to take turns
5.8.
Dismounting mower from tractor
WARNING:
When dismounting, make sure there is no person in between the mower and
the tractor.
To dismount the mower from the tractor:
❑
left the swath,
❑
turn cutterbar's drive off,
❑
place the mower on even, paved ground, lower and protect support legs, check, if the mower is
properly protected against falling,
❑
turn the tractor's engine off and take ignition key off,
❑
dismount tractor's rpm and place it on a PTO shaft holder, that is standard-delivered with the
mower,
❑
disconnect hydraulic hose,
❑
detach tractor's upper link and lower strands from mower's linkage.
❑
carefully drive the tractor away.
6.
MOUNTING AND ADJUSTMENTS
6.1.
Mounting and timing of the knives
The knives should be mounted as shown in
Mount the knives so that cutting edges
are directed towards ground, so that a knife lifts the grass after cutting.
Fig. 20
. Mounting of the knives on mowing discs
