Operator's manual
Arm
Flail head
- 17 -
3.2.3. Mounting flail heads Lama 121 and Lama 141
Lama 121/141 heads are attached to an extension arm with a standard single or 4 optional types of
fittings available, which enable different manners of mounting the head (Fig. 20).
Fittings are of the following types:
1.
The basic is a rigid fitting, simple and light, attached to an extension arm with 6
screws M14 (SaMASZ-standard).
2.
Swivel fitting, mounted with 6 screws M14 (SaMASZ-standard) to an extension arm,
enables the head to be swiveled every 15° in 4 positions.
3.
Swivel push-in fitting, enabling quick coupling/releasing of the head to/from the arm and
allowing the head to be swiveled every 15° in 4 positions.
4.
Mounting for ground-following linkage, connected to extension arm with 6 bolts M14.
5.
Mowing head ground-following linkage. Extension for mechanical ground following with
260mm travel. Mounted on extension arm with 6 bolts M14 (SaMASZ standard).
Fig. 20. Types of head mountings: Lama 121/141 – 1 - Fixed mounting, 2 – Rotary mounting,
3 – Hydraulic turntable, 4 – Mounting ground following linkage, 5 – Mowing head ground-
following linkage
1
2
3
4
5
