Operator's manual
Arm
Flail head
- 27 -
The following bans should be borne in mind when operating the machine:
do clean impurities, make any adjustments or repairs when the machine is in operating mode,
never change the sequence of operation and maintenance works specified in the operator's
manual,
never operate the machine when it is not in working condition or has safety guards damaged,
never get your limbs close to rotating parts of the machine,
during the machine repair and maintenance works always comply with the descriptions included
in the operator's manual, while conducting them with the tractor drive disconnected,
prior to approaching any activities, focus your attention on the tasks to do,
never operate the machine being under the influence of alcohol, drugs, or strong medicines,
your wear should not be too loose, nor too tight. Too loose clothing elements may be pulled in by
the machine rotating parts,
the machine cannot be operated by children nor handicapped people
When describing residual risk, the arm shall be considered a machine, which until the moment
of production launching had been designed and manufactured in accordance to top actual technology
level until the day of the machine manufacture.
CAUTION:
There is possibility of residual risk if not complying with specified instructions
and bans.
4.7.1.
Residual risk assessment
When keeping such recommendations as:
thorough familiarizing with operator’s manual,
no persons remaining within the machine operation range,
adjustment, maintenance and lubrication of the machine with engine off,
performing repairs of the machine only by skilled persons,
operation of the machine by persons, which are familiarized with operator’s manual,
in the event of the machine protection against children and unauthorized personnel
residual risk when operating the mower may be limited to necessary minimum.
When the risk of exposing to noise cannot be avoided or eliminated by any group
protective means or organization of work, employer (farmer) must:
1) provide the operator with individual means of noise protection, if the noise level
in work place exceeds 80 dB.
2) provide the operator with individual means of noise protection and supervise
the correctness of its use, if the noise level in work place reaches or
exceeds 85 dB.
4.8.
Operator's qualifications
To provide safe machine operation each person being the machine operator must meet the
following requirements:
Operator should hold driving license, have ability to drive vehicles safely and know road traffic
rules.
Operator must be in proper physical condition to be able to operate the machine.
Operator must not be under the influence of alcohol, drugs and medicines, which all have
influence on vehicle driving and machine operation.
Operator should be familiarized with this manual and follow its provisions.
Operator should be familiar with working principles of both the tractor and the machine, and be
able to recognize and avoid hazards resulting from operation of the aggregate.
