Operator's manual
DITCH CLEANER
OR 080 (L)
-
3
-
3.
INTENDED USE AND DESIGN
Ditch cleaner is additional equipment to extension arm and is designed for road cleaning
works so as cleaning road ditches from sludge, which continues to collect notoriously. Ditch cleaner
can be used for cleaning ditches featuring any width and depth, including however maximal
machine’s operating output. Ditch cleaner is NOT to be used for any works other than ditch
cleaning.
Ditch cleaner OR 080 is designed to cooperate with the following extension arms:
KWT
Camel
The cleaner may also be mounted on other type of extension arm with the same linkage type
or any other previously adapted.
Fig. 2.
Mounting plate of ditch cleaner
CAUTION:
It is forbidden to use the machine for purposes other than those listed in this
instruction. Using the machine for other purposes will be classified as use not
according with the intended use and could exclude the manufacturer from
responsibility from any resulting damages. The machine should be used,
serviced and repaired only by persons familiar with its characteristics and with
safety regulations. Unauthorized modification of the machine may release the
manufacturer from responsibility for any resulting malfunctions or damages.