17
OPERATOR’S MANUAL
TRAILED ROTARY TEDDER
P10-1200
In order to select the right control cylinders for the machine assemblies:
1.
arm folding cylinder or tilt cylinder - select the
B2
button,
2.
wheel rotation cylinder or tarpaulin sheet cylinder (the
B3
button).
To extend the life of the coil on the solenoid valves, the controller will automatically switch to the default mode after one
minute, which does not require the power supply of the coil of the directional valves.
Fig. 9.
Control:
A
–
Cigarette socket plug,
B
–
Control panel
(
B1
–
power switch for proximity sensors for controlled wheel settings,
B2
–
control switch between the arm, folding cylinder and the tilt cylinder,
B3
- control switch between the tarpaulin sheet cylinder and the wheel rotation cylinder),
C
–
Front control lever for the three-point linkage and the hydraulic system;
(* - the control system is different for different tractor types)
5.3.
Preparing the tedder for transport
The correct transport position of the machine is shown in
. The tedder arms are positioned
parallel to the direction of travel. Both controlled and rotational wheels should be aligned parallel to the
machine arms.
Fig. 10.
Transport position
B3
B2
C*
A
B
B1
