19
OPERATOR’S MANUAL
TRAILED ROTARY TEDDER
P10-1200
WARNING!
Failure to fold in the tarpaulin sheet will cause its damage when folding the
machine into the transport position.
d)
Fold the machine with the main central cylinder until the side arms are parallel to the direction of
travel
The tedder is folded into the transport position with help of one central cylinder under the main frame
of the machine. Folding out and down is carried out by extending and retracting the cylinder.
Fig. 13.
Position of the main central folding cylinder
Folding to the transport position is achieved by moving the tedder arms from the position perpendicular
to the direction of travel to the parallel position. Folding should take place on a flat, horizontal surface.
Fig. 14.
Folding to the transport position
WARNING!
There is a risk of the machine rolling down laterally when the controlled wheels
are perpendicular to the direction of travel. The machine should be adjusted on
level ground.
Main central folding cylinder
WARNING!
RISK OF THE MACHINE ROLLING DOWN!
