22
P10-1200
TRAILED ROTARY TEDDER
OPERATOR’S MANUAL
5.4.
Preparing the tedder for transport on public roads
To meet safety precautions concerning transport on the public roads the tedder should be
equipped with two warning plates
T
). The plates are in standard equipment of the tedder
.
WARNING!
The warning devices can be ordered from the tedder manufacturer
.
Fig. 17.
Warning plates
During transporting on public roads, follow the traffic regulations.
Due to high transport speeds, rotary wheel systems are equipped with vibration dampers (brakes) (
) improving stability of travel direction. The factory-set dampers must be subjected to periodical
control consisting in tightening the springs with their adjusting screw or replacing plastic inserts, if
needed.
Fig. 18.
Travel direction stabilisers (brakes) of the rotating wheel systems
WARNING!
If the brake inserts at the rotary axles are not adjusted correctly or worn out, these
wheels may start vibrating. If wheel vibrations occur at higher speeds, check the
condition of the brakes or adjust the damping force.
Damper insert
Spring
Adjusting screw
Clamp
Pad
T
