24
P10-1200
TRAILED ROTARY TEDDER
OPERATOR’S MANUAL
WARNING!
If need be, shorten the PTO sha
ft according to its operator’s manual given by the
shaft’s manufacturer
).
Fig. 20.
Instruction of PTO shaft shortening
WARNING!
PT
O shaft’s end with friction clutch should be mounted on tedder’s side
.
WARNING!
The PTO shaft should be mounted only during operation time and disconnected
from tractor PTO for transport and service.
5.6.
Switching from transport to working position
❑
Drive the tedder to an even ground.
❑
Stop the tractor.
❑
Make sure there is nobody around in the place where you are going to lower the tedder.
❑
Turn the controlled tedder wheels so that they are perpendicular to the main bars of
the machine.
WARNING!
There is a risk of the machine rolling down laterally when the controlled wheels
are perpendicular to the direction of travel. The machine should be adjusted on
level ground.
