25
OPERATOR’S MANUAL
TRAILED ROTARY TEDDER
P10-1200
Fig. 21.
Extending the tedder arms by means of the main central cylinder
5.7.
Preparing the tedder for work
WARNING!
During storing of the machines in company SaMASZ the cylinders are protected
by special grease in order to secure them against weather which may cause their
premature wear. Before starting the operation excess grease should be removed
from the cylinders.
At the workplace and after setting the tedder, in the operating position must be:
❑
mount the PTO shaft tip on the PTO of the tractor (if only one tip has been removed) or install the
entire PTO shaft,
90°
90°
