background image

 

38 

P10-1200 

TRAILED ROTARY TEDDER 

OPERATOR’S MANUAL

 

 

WARNING!

 

During  your  purchase  please  make  sure  that  the  seller  carefully  fills  out 
the warranty  card  including  the  place  and  date  of  purchase  and  the  seal  and 
signature of the seller. Missing information can cause the loss of warranty

.

 

 

WARNING!

 

The warranty card is valid only when there are the following information: address, 
date and place of purchase, tedder type and invoice number

.

 

 

WARNING!

 

When  the  warranty  expires,  repairs  can  be  done  for  a  payment  by  the

 

entitled 

repair shops pointed by the dealer. The dealer is obliged to indicate them.

 

 

WARNING!

 

The manufacturer reserves the right to introduce changes in construction.

 

 

WARNING!

 

Company SaMASZ is working constantly on development of all types and models. 

That is why, there is always a possible change of form, equipment and technology 
of delivered products. Any claims arising from data, drawings and descriptions 
included in this operator’s manual and spare parts list cannot be laid.

 

The SaMASZ is not responsible for printing errors. 

 

11.2.

 

Warranty repairs record 

Repairs description and changed spare parts: 

 
 
 
 

Date, stamp and signature of repair shop.

 

 

 
 
 
 

Date, stamp and signature of repair shop. 

 

 
 
 
 

Date, stamp and signature of repair shop. 

Summary of Contents for P10-1200









































Reviews: