Operator’s manual
Rotary tedder
P4-420
,
P4-471
and
P4-531
Rotary tedder
P6-651
and
P6-771
Rotary tedder
P8-790
and
P8-890
- 18 -
The tedder should be mounted on tractor with use of 3 -point linkage as provided in
Fig. 10
.
Upper link
G
should be mounted on pin
S1
in the catch eye (
Fig. 10b
). In the case of very
uneven meadows, in order to increase the ground following range, it is possible to replace the
stiff connector with chain
L1
(
Fig. 10d
)
.
Hangers
W
for tractor's lower links should be placed
on pins on the tedder's linkage frame (
Fig. 10a
).
Chain
L
shall be placed on the top link pin in order to protect the rake from falling
of hangers
W
.
Lift up support legs (
Sp
) and secure them with pins.
Connect the machine's hydraulic hose to the tractor one-section hydraulic connector.
In the case of
P8
tedders, connect pairs of hydraulic hoses
Fig. 10c
) (
H1
– folding (unfolding)
the machine and (
H2
– folding (unfolding) the windrow curtain “field edge” (optional)) with the
proper pairs of machine’s hydraulic connectors.
Connect the machine's lighting cables (
E1
) (
Fig. 10c
) to the tractor and check the lights for
operation.
NOTE:
In the case of
P8
tedders, no connection the machine's lighting cables makes it impossible
unfolding the machine.
Connect telescopic articulated shaft. If need be shorten the shaft as per item 5.4.
Fig. 10.
Connecting the tedder to the tractor:
a)
upper link (
G
) in transport position;
b)
upper link (
G
) in working position,
c)
pairs of hydraulic hoses (
H1
) – folding (unfolding) the raking arms
(
H2
) – folding (unfolding) the windrow curtain “field edge” (optional)
S1
S2
S1
G
b)
C
G
W
L
a)
Sp
d)
L1
c)
H1
H2
E1
